TIG MIG Mag Arc CO2 Welding/Gantry H Beam H Profile Welder

Gantry gate type H-beam welding machine is economical and high effecient, designed with extensivie industry experience. It can weld two H-beam work pieces one time.

Introduction:
The welding machine has simple and reliable structure and smart layout.
The main transmission uses imported AC frequency converter to control both sides' synchronous speed adjusting drive, with stable speed, reliable digital display of linear speed. And there is three axis mechanical tracking guide arc device, while the up and down is pneumatic tracking, the left and right is floating tracking, thus ensure welding torch to centralize the welding seam accurately. The sub merge arc welding power setup device is on the gantry gate, and moves along, and in this way, the control cable and welding cable is short, replies fast, pressure drop small, and welding currency stable. Welding control and gate frame control are integrated and easy to operate. The cable in welding arm is in the form drag chain, neat and safe.
Characters:
1. The H beam gantry gate welding machine has two structures: Gantry gate move type & double cantilever move type.
2. Gantry gate or cantilever drive method: AC motor and R series worm reducer.
3. Welding speed: 0.15~1.5m/min.
4. Arc guide frame head function is to mechanically track up and down, left and right.
5. Imported frequency converter is able to realize gantry gate or cantilevers stepless speed adjustment, with wide speed adjustment range, high accuracy and constant output torque.
6. Electrical control cabinet includes main control cabinet and remote operation box.
7. Two work-piece at one time.

Supply scope:
1, Gantry gate unit: Gantry gate, travel device, lateral sliding device, feeding wire wheel and pipe accessories.
2, Welding arm and carriage: Welding arm, motor transmission device, move device and accessories (2 sets each).
3, Arc guide device: Welding gun, mechanical adjusting unit and feeding wire machine (2 sets each).
4, Flux recovery system: 100kg flux recovery machine, separate material barrel, flux hopper, flux recovery and transmission pipe.
5, Electric control system: Electric control cabinet, AC frequency converter, operation box, lighting, warning light.
6, Pipe and wire system: Welding machine power wire, control wire, welding cable, gantry gate control cable, air source pipe, suspending sliding frame.
7, Welding system: MZ-1000 sub merge arc welding machine*2sets.
Service and warranty:
1. check and acceptance
Accept according to technical agreements and contract between each other.
2. normal principles
2.1 according to supply scope, provide complete and effective documents.
2.2 the equipment works stale and reliable. No deformation, abnormal shake, liquid leak, air leak and electricity leak. The moving parts like chain, skate board, coupling, main shaft works steadily and accurate.
2.3 all the parts in the machine should install correctly and firmly. No outside damage, and all the welding seams are in good condition, no slag, crack, dent and etc. The welding seam should be removed stress.
2.4 all the pipes and wires, with correct joint and reliable joint. They should be arranged in order, correct, firm and neat. There should be necessary protect, no wrinkle, shrink or cracks and etc.
2.5 the lubrication system should work normally, and the reliable lubrication point is easy to access.
2.6 the painting should be full filled, glossy, no paint shortage, no color difference and other defective phenomenon.
2.7 the name plate of the equipment is complete, clear and the grounding is comply to standard.
3. after the test and acceptance, the machine has 12 months warranty.
And after the 12 months warranty period, we also supply whole life technical support and repair service. And provide spare parts in low prices to user.
 
Delivery
30 days from execution from contract.

Tracy Yan
Mobile: +86-151 5223 3338